Apart from the accessories necessary for the installation of baths and shower trays with a Poresta supporting frame, there are a large number of products which contribute to the visual and functional design of the bath or shower area..
Poresta packing pieces and shelves
Whether a bath/shower tray is installed in the middle of the room or in a niche - shelves and packing pieces are almost always required. Shelf areas produce a more generous look and are useful for bathing utensils. Suitable shelves and packing pieces are available for any bath/shower tray. On request, also available with integrated fitting panels for easy installation of the water tap and shower connections.
Custom-made elements are of course also made for special shapes and dimensions.
– 2 end packing pieces are required to fill the gaps with the wall if a hexagonal or oval bath/shower tray is installed against a wall
– 4 end packing pieces are required to form a rectangular outer contour of the supporting frame from the hexagonal or oval outer contour, for example for niche installation
– 4 end packing pieces are required to form a rectangular outer contour of the supporting frame from the hexagonal or oval outer contour, for example for niche installation
– Steps for hexagonal and rectangular baths/shower trays with a height of 200 mm and a width of 240 mm make it easier to enter the bath/shower. The length of these parts can be shortened and are therefore suitable for hexagonal baths/showers from 1800 - 2100 mm and for rectangular baths/showers from 1600 - 2000 mm.
Packing piece for installation of wall-mounted and concealed, flush fittings
- Area of use: Design of rectangular shelves with raised fittings holder
in conjunction with shelf - Height of the rectangular module 875 mm, width 585 mm and visible depth 150 mm
Front shelf for across-corner installation
- Visible shelf width 80 mm
- Height = supporting frame height – level of bath/shower tray edge – 15 mm for
tile thickness - Used with hexagonal and octagonal baths/shower trays
Packing piece for across-corner installation
- Height of the packing piece = height of the supporting frame
- Used with hexagonal and octagonal baths/shower trays
Packing piece incl. installation block and fittings panel for free-standing fittings
- Height of the packing piece including installation block = height of the supporting frame
- Used with hexagonal and octagonal baths/shower trays
All-round shelf, oval, round
- Oval shelf around an oval bath/shower, visible shelf width 80 mm
- Height = supporting frame height – level of bath/shower tray edge – 15 mm for
Tile thickness (see cross-section sketch)
(siehe Querschnitt-Skizze)
All-round shelf, rectangular
- Rectangular shelf around an oval bath/shower, visible shelf width 80 mm
- Height = supporting frame height – level of bath/shower tray edge – 15 mm for
Tile thickness (see cross-section sketch)
(siehe Querschnitt-Skizze)
System cross-section bath/shower tray with supporting frame and shelves
Poresta corner module
The Poresta corner module is especially practical for the installation of hexagonal and octagonal baths/shower trays. By combining a corner packing piece and a mounted fitting module with installation device for wall-mounted and concealed, flush fittings of all manufacturers the voids between the bath/shower tray and wall can be filled and simultaneously a fitting can be installed. For simplified installation the fittings panel can be removed and the fittings installed in the required position. The corner packing pieces are bath/shower-tray high, the corner modules are available with optional 305 mm or 610 mm height from the edge of the bath/shower tray.
Corner module, universal, low
- for installation of wall-mounted and concealed, flush fittings
- Height of the corner module = supporting frame height + 305 mm
- Used with hexagonal and octagonal baths and showers
Einsatzbereich bei Sechs- und Achteckwannen